45mm Professional electric secateurs,progressive mode,for olive and orchard |25.2V-2*4Ah|Working10-12h|1030g|1150W| PRU-45
45mm Professional electric secateurs,progressive mode,for olive and orchard |25.2V-2*4Ah|Working10-12h|1030g|1150W| PRU-45
Couldn't load pickup availability
SWANSOFT 24-Month Warranty Terms
SWANSOFT 24-Month Warranty Terms
🛡️ SWANSOFT Warranty Coverage
All SWANSOFT electric pruning shears come with the following commercial warranty coverage:
- Tool Body: 24-Month Warranty — Including the motor and internal mechanical and electronic components.
- Batteries: 6-Month Warranty.
- Blades: Excluded from the commercial warranty.
⚠️ Important Battery Care: If the tool is not used for an extended period, recharge the batteries at least once every two months to help prevent damage caused by over-discharge.
For warranty claims, repairs, or replacement parts, please contact our customer support team to discuss the appropriate solution.
This commercial warranty does not affect your statutory consumer rights.
SWANSOFT 30-Day Hassle-Free Returns
SWANSOFT 30-Day Hassle-Free Returns
↩️ SWANSOFT 30-Day Return Policy
SWANSOFT offers a 30-day return policy starting from the date your order is delivered.
- Non-defective returns: Customers are responsible for return shipping costs.
- Defective or incorrect items: SWANSOFT covers reasonable return shipping costs.
- Return condition: Products should be in good condition, with all accessories included whenever possible.
To request a return, please contact our customer support team first. Our team will review your request and help arrange an appropriate return and refund solution.
Proforma Invoice Request
Proforma Invoice Request
SWANSOFT only provides Proforma Invoices upon request. Please contact our customer support team or email us with the following information:
- Full Name or Company Name
- Order Number (if applicable)
- Company Address or Billing Address
- Company Tax ID / EIN (if available, optional)
- Email Address
Once we receive your information, our team will assist you with your Proforma Invoice request.
①Supports PayPal, Klarna 12-month and 24-month installment payments
②We accept bulk purchases and offer up to 30% off the entire order. Please contact customer service if interested.
③Checkout Notice: For items valued over €140, the logistics provider requires a phone number. Please take note of this.
- Price guarantee--24 month warranty
- 30-Day Return & RefundGuarantee
- Fast&Free Delivery-EU local shipping
- 20+ Years Factory Experience
- Professional Technical Support
- Secure Payment
Contact information
Contact information
Company name: Swansoft Machinery Co.,Ltd
WhatsApp: +1 6163786511
Email: service@swansoft.eu
🛡️ Warranty & Customer Support
SWANSOFT is committed to providing European customers with reliable products and professional after-sales support.
Our customer support team is based in China, so please be aware of the time difference between China and Europe. Some enquiries may not receive an immediate response, and we appreciate your patience and understanding.
Whether you need assistance with warranties, technical support, order delivery, returns, refunds or other after-sales matters, we take every message seriously and will respond as soon as we review your enquiry, working to resolve your concerns as quickly as possible.
You can contact us at any time through our website's live chat or by email.
Shipping Policy
Shipping Policy
Fast&Free shipping
Order processing time: 1-2 days
Delivery time: 3-7 days
Shipping location: EU Local delivery,Free shipping
Shipping information: You will receive an email with a tracking number after your order has been shipped.
FAQ and After-sales Service
FAQ and After-sales Service
What features make your electric pruning tools stand out?
As an OEM supplier to leading European brands for over 10 years, we've built a reputation for quality, reliability and innovative technology. Millions of satisfied users across Europe have proven the quality and performance of our secateurs.
Are there any discounts available on orders?
Yes! We offer a €20 discount on orders over €199 and €35 discount on orders over €499
10% discount on spare parts. All discounts are applied automatically at checkout.
What is your return policy for electric pruning tools?
We have a 30-day return policy. To be eligible for a return, items must be in the same condition as received, unworn or unused, with tags, and in original packaging. Please contact us to initiate the return process.
Where are your products stocked?
We hold stock in strategically located warehouses across Europe: Poland, Italy, Spain, France and Germany. This ensures fast delivery to our customers.
How long does shipping take for orders?
For most Western European countries, orders are delivered free of charge and typically arrive within 7 days. While international orders may take between 10 to 20 days, depending on the selected courier. Orders are usually dispatched within 2 business days of payment.
Do you have repair centres for your products?
Yes, we offer repair services in Italy, Spain, and Poland to assist with any maintenance or repairs needed.
Do you offer warranty on your products?
Yes, we offer a 1-year warranty for professional users due to the intensive nature of their work and a 2-year warranty for personal garden users.
What payment methods are accepted on your website?
We do not accept PayPal as a payment method. Instead, we collect payments through PingPong, a leading payment management company.
Can I change my delivery address after placing an order?
Absolutely! If you need to change your delivery address, just let us know before your order has been dispatched. We’re here to make your shopping experience as smooth as possible!
What should I do if my order arrives damaged?
We take great care in packaging our products, but if you find that your order has been damaged in transit, please contact us immediately. We’ll guide you through the next steps to ensure you receive a replacement or refund. Your satisfaction is our priority!
How can I contact customer service for further inquiries?
You can reach our customer service team via email at service@swansoft.eu or through WhatsApp at +1 6163786511 for any questions or concerns regarding our products or services.
After-Sales Process
After-Sales Process
1. Contact customer service via the website or email.
2. Describe the issue and provide photos or videos.
3. A solution will be determined based on the nature of the issue.
4. A 24-month warranty applies automatically, starting from the date the order is placed.
A signature masterpiece representing 20 years of R&D expertise from Swansoft
- PRU45 – High-capacity industrial model (best value for money), cordless electric pruner for vines, olive trees, fruit trees, gardening, orchards.
- Cutting diameter up to 45 mm: The blades of the SWANSOFT-PRU45 electric loppers can easily cut branches up to 45 mm thick without causing damage. The blades of this battery shear are forged from high-carbon SK5 Swiss steel, which is sharp and wear-resistant. A flat and quick size like cutting butter easily
- 【1.2M WEIGHT REDUCTION CABLE】 - With the extension cord and waist bag, the set weighs only 1030g, relieving your wrist from pain. The handle of the cordless shear fits ergonomic design, shockproof and non-slip, you will not feel easily tired after prolonged use
- 【Progressive cutting control】 - The opening of the blade of the electric shear can be stopped at any angle between 0 and 45 mm, which allows a fine and precise cutting as with a manual shear and achieving a more secure and detailed size operation
- 【Ultra Durable 100% Copper Brushless Motor】 - The power of this electric shear uses a brushless motor, which is more powerful, the speed is faster and the cutting of branches is easier. And greatly reduce energy loss and heat caused by motor friction, no need to replace carbon brushes and longer service life
- 【High performance battery】 - This shaft shear is equipped with 2 rechargeable batteries of 25V 4000mAh, all batteries have passed various safety certifications in the United States and Europe, such as UL, CE/UL/MSDS/UN 38.3/ROHS certification. Both batteries have overload and temperature protection and longer service life, its efficiency is 8-10 times that of manual size shears
|
Cutting Diameter |
0-45mm |
Lithium Battery |
25.2v 4Ah |
|
Max. Power |
1150W |
Work autonomy |
10-12 hours |
|
Pruner Weight |
1030g |
Charging Time |
3-4 hours |
|
Battery Weight |
515g |
Memory system |
Yes |
|
LED screen |
Yes |
Progressive mode |
Yes |






Take a look at our Italian、Spanish orchard client, who has been partnering with us for many years—thank you for support of Swansoft!
Italy
Italy
Italy
Italy
Spain
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Spain
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Spain
Italy
Italy
Italy
Italy
Italy
-
SWANSOFT Scissors Model Selection Guide
Learn more,Solve your pruning problems at a reasonable price.
-
Why Choose SWANSOFT
Learn more about the SWANSOFT brand and technology
6 Key Challenges in Professional Pruning
-
① Thick Branches → Greater Cutting Force
The PRU-40 delivers about 90% more listed cutting force and twice the listed torque of the entry-level PRU-28 and PRU-28SE.
-
② Long Pruning Sessions → Less Weight in Hand
A rubberized grip helps you hold the tool securely. Compatible models let you carry the battery on your belt.
-
③ Heavy Use → Wear-Resistant Blades and Durable Construction
Both SK5 blades are heated to about 800°C and then quenched. Forged aluminum alloy components are built for frequent orchard work.
-
④ Delicate Cuts → Progressive Blade Control
The blade follows trigger movement on professional models. The PRU-40’s 0–40 mm stepless opening lets you shorten blade travel for thin shoots.
-
⑤ Frequent Charging → Two-Battery Runtime
Professional models use EVE 10C-rated cells. Select two-battery models provide about 8-12 hours of combined runtime with both batteries fully charged.
-
⑥ Tool Breakdowns → Local Repair in Europe
A 24-month warranty and local repair centers in Poland, Italy, and Spain provide after-sales support under the applicable terms.
Detailed Specifications for Professional Models
Swansoft shears demonstrate professional-grade capabilities—including continuous runtime, power, cutting force, torque, and progressive cutting functionality—that are approximately twice the performance of standard shears.
Professional Electric Pruning Shears-Ample supply of parts, available year-round!
-
⚡ 01 | High-Output Brushless Motor
850–1,150 W listed power for consistent cutting
Representative SWANSOFT models list 850–1,150 W The brushless motor and electronic controller deliver steady power for repeated orchard cuts.
Cutting force and torque
- PRU-28 / PRU-28SE entry-level models · 0.70 tf cutting force and 130 N·m torque
- PRU-40 professional model · 1.33 tf cutting force and 260 N·m torque
- PRU-45 professional model · 300 N·m torque
Compared with home-garden models
Using SWANSOFT’s entry-level models as the baseline, the PRU-40 lists about 90% more cutting force and twice the torque. The PRU-45 lists about 2.31 times the torque. The torque of the professional model is at least 1.5 times that of the standard model. -
✂️ 02 | High-Strength SK5 Blades
Heated to about 800°C and quenched for clean cuts
Both the moving and fixed blades are made of SK5 steel. They are heated to approximately 800°C and then quenched to improve hardness and wear resistance.
- Sharp edges help produce clean, smooth cuts
- Helps reduce bark pinching and tearing
- Suited to frequent orchard pruning
Compared with home-garden models
Some home-garden models also use SK5(600°C ). SWANSOFT specifies the steel and heat treatment for both blades on its professional models. Measured hardness and edge wear provide a basis for comparing durability. -
03 | Progressive Cutting and Stepless Opening
Control blade movement with the trigger
On professional models, the blade follows trigger movement so you can close it gradually. On the 40 mm model, the blade opening can be set from 0 to 40 mm.
- Use a smaller opening to reduce blade travel on thin shoots
- Close the blade gradually when pruning crossing branches
- Control blade movement near branches you want to keep
Compared with home-garden models
Common home-garden models have a smaller or fixed opening. Select semi-professional models offer 25 mm and 45 mm presets. Professional models combine stepless opening adjustment with progressive trigger control. -
04 | EVE Battery Cells
10C discharge rating on professional models
Professional models use 10C-rated cells. SWANSOFT semi-professional and entry-level models use 3C-rated cells.
- Select two-battery configurations provide about 8–12 hours combined with both batteries fully charged
- The built-in BMS protects against overcharging, overdischarging, overcurrent, short circuits, and overheating
- Runtime varies by model, branch thickness, and cutting frequency
Compared with home-garden models
At the same cell capacity, the professional 10C cells support higher discharge current than the 3C cells in SWANSOFT entry-level models. This helps meet the current demands of repeated cuts and thicker branches. -
05 | Durable Construction and Protected Electronics
Precision manufacturing and less weight in hand
Key structural components use forged aluminum alloy. The glass-fiber-reinforced nylon housing has a rubberized grip. Precision CNC machining and electrical discharge machining help keep mold dimensions consistent.
- 30 mm and 36 mm models are lighter
- The overmolded control board helps protect against moisture
- The controller protects against overcurrent, motor stalls, overheating, and short circuits
- Select models include electronic protection designed to help reduce accidental cuts
Compared with home-garden models
Many home-garden models carry the battery on the tool. Compatible professional models let you carry it on your belt, reducing the weight in your hand during long pruning sessions. -
06 | Local Repair Support in Europe
In-person repair service in three countries
SWANSOFT has sold approximately 160,000 professional pruning shears, with distribution across more than 30 European countries and a network of around 500 mid-sized and large farmer.
- Local repair centers in Poland, Italy, and Spain
- 24-month warranty and 30-day returns
- Coverage is subject to the applicable after-sales terms
Compared with home-garden models
Repair options vary by seller, and some products require mail-in service. Orchard operators and pruning crews can contact a local SWANSOFT repair center in any of the three countries listed above.
Utilizes high-quality batteries from EVE, a partner company.
🔋 POWERED BY EVE — A LEADING CHINESE BATTERY MANUFACTURER
🏆 Publicly Listed: Shenzhen Stock Exchange since 2009 (300014).
🏭 Manufacturing Excellence: Advanced automated production lines and large-scale battery facilities.
🌍 Global Partnerships: Selected for battery supply programs by BMW, Jaguar Land Rover, and Hyundai-Kia.
⚡ Premium Quality: High energy density, stable performance, long cycle life, and strict quality control.
SWANSOFT uses premium EVE battery cells for reliable power and extended runtime.
PARFAIT
Hat meine Erwartungen voll erfüllt … Schneide meine Bäume problemlos … bin sehr zufrieden
Super outils pour le jardin et plantation déjà 2 millions de coupe et va tjr comme le premier jour ( recommande).
Moi, je suis beaucoup equipé par une marque très connue de couleur orange et blanc.
Dans cette marque, un sécateur avec une ouverture de 45mm et une batterie déportée, c'est de base 1000€.
Donc je me suis dit pourquoi ne pas essayer ce PRU45.
L'essai est plus que concluant, ca marche fort.
Das ist schon die zweite Akkuschere… die erste vom letzten Jahr funktioniert auch im 2. Jahr noch sehr gut aber zu zweit ist man mit zwei Scheren noch schneller.😅 Das neuere Model hat eine noch größere Schnittbreite. Akkus halten sehr lange - meistens reicht einer am Tag aus. Auch für sehr hartes Holz, wie Olive sehr gut. Olivenhain und Obstbäume waren in sehr kurzer Zeit fertig geschnitten. Auch die Teleskop-Verlängerung ist perfekt, so kann von unten geschnitten werden. Wir wollen es nie wieder missen - tolles und hochwertiges Produkt!
80w cuts, 5 years without maintenance – High quality
Carefully cutt every moment
Pru-Series
800,000 trimming cycles quality assurance; no maintenance required over five years.
Pru-Series
800,000 trimming cycles quality assurance; no maintenance required over five years.
Pru-Series
800,000 trimming cycles quality assurance; no maintenance required over five years.
Why Buy From Swansoft Store
20+ years of R&D and investment
Offline service points are located in Poland/Italy/Spain
EU local shipping,3-7 days for delivery,Free shipping
Brand quality, 24-month warranty
Easy Returns, Peace of Mind
Brand supported by 130k professionals
Sufficient stock of stations and offline accessories throughout the year
Supports Multiple Payment
Methods
To date, Swansoft has established partnerships with over 800 medium- and large-scale distributors worldwide,The number of medium-to-large-scale exhibitions participated in has reached over 100.
Thanks to our customers for support of Swansoft.
Trusted by 130k consumers
Since 2004, SWANSOFT has engineered premium electric tools for EU/US pros. From orchard pruning shears to hydraulic crimpers, we deliver top-tier brand quality at just 30% of the price. Built for professionals.
All Swansoft products have been tested by EU agencies and have obtained CE, RoHS, EMC, and battery testing certifications.
Safety has always been our primary mission
We are dedicated to providing excellent service to every customer.
SWANSOFT — More Than A Tool Brand, Your Long-Term Partner
For over 20 years, we have worked with more than 800 farmers, contractors, and medium-to-large companies around the world. They have placed their utmost trust in us and remain our loyal partners to this day.
We believe a great tool brand is not only built on manufacturing quality products.
It is built by understanding users, supporting professionals, and growing together with industry partners.
From product development and quality control to customer support and long-term cooperation, SWANSOFT remains committed to one goal:
Providing reliable electro-hydraulic tool solutions for professionals worldwide.
Together, we continue to create smarter, more efficient, and more reliable ways to get the job done.
FAQ
1. What makes SWANSOFT PRU Series pruning shears professional-grade?
Professional pruning calls for enough runtime for extended work, the ability to handle branches of different sizes, and precise blade control. The PRU-45Plus is designed for frequent pruning in orchards. It combines 1,150 W of maximum motor power, high-strength SK5 steel blades, and progressive cutting, with a rated maximum cutting diameter of 45 mm. Its design draws on more than 20 years of SWANSOFT tool development and manufacturing experience.
2. Which model should I choose: PRU-36, PRU-45 or PRU-45Plus?
Choose the PRU-36 if you mainly prune small to medium branches or shape fruit trees. Its rated maximum cutting diameter is 36 mm. If your work regularly involves thicker branches, consider the PRU-45 or PRU-45Plus, both rated for cuts up to 45 mm. Start with the branch sizes you cut most often, then compare what’s included in each kit. Actual cutting capacity can vary with the tree species, wood hardness and moisture content.
3. Are these shears suitable for long pruning sessions?
Yes. They are designed for extended pruning sessions in orchards and for landscaping crews. Estimated working time is 8–10 hours for the PRU-36 and 10–12 hours for the PRU-45 and PRU-45Plus. The PRU-45Plus uses EVE battery cells. Actual runtime depends on how often you cut and on branch thickness and hardness. Check the individual product page for the battery configuration included in each kit.
4. How does progressive cutting work?
The blade closes gradually as you squeeze the trigger, giving you more control over the cut. This is especially useful when thinning crowded branches or shaping a fruit tree canopy, where precise blade placement matters. Both the PRU-45 and PRU-45Plus offer progressive cutting.
5. What materials are used for the blades and housing?
The PRU-45Plus uses high-strength SK5 steel blades and a glass-fibre-reinforced nylon housing that protects the internal components. If you’re preparing for pruning season, check which replacement blades and spare parts fit your specific model.
6. How do warranty, repairs and returns work in Europe?
SWANSOFT has local service centres in Italy, Spain and Poland. The tool body is covered by a 24-month warranty, and the battery is covered for 6 months. Blades are wear parts and are excluded from warranty coverage. For repair assistance, contact customer support with your order number, model and a photo or video of the issue. Eligible orders can be returned within 30 days, subject to the return policy on our European store.